New PC

Posted by yihzy on Sep 19th, 2006
2006
Sep 19

After my final+ attempt to revive my old pc failed (BIOS has been corrupted), I’ve bought a new PC on the 1st of September. The new PC specs are as follow

AMD x64 X2 3600+
Asus M2NPV-VM – Nforce 6150 Chipset with onboard 430 GPU
Seagate 160GB HDD SATA
2 x 512MB Kingston DDR2 667Mhz Value RAM
Generic brand Power supply (labelled as 500W peak power) and casing

some of the photos of my pc.
pc casing

motherboard box   power supply

My complains about the asus motherboard,
1. no heatsink on 430 GPU chipset. The chipset is quite hot during graphic intensive application and yet asus does not install a heatsink on it. probably to save cost and the heatsink might be blocking graphic cards on the PCI-E slot.
430 chipset

2. memory imcompatibility – it seems that the Asus M2N series is quite picky about the memory being use.I purposely bought my 1GB RAM in 2 x 512MB because i wanted to try out dual channel mode but I was so depressed after i found out that the Blue Screen of Death (BSOD) popped up during the winxp installation. Only after i install the RAM in single channel mode then can I complete the windows installation.

The funny thing was, after the installation I could run winxp in dual channel mode. I’ve even tried flashing the BIOS to the latest revision, but it was even worse, the comp will goto BSOD halfway loading winxp. guess i’ll stick with my old BIOS and dual channel configuration.

other than that, i’m glad that my new PC is performing as expected. Picasa, photoshop, acdsee all loaded faster than before. The idle temperature is around 35C with amd cool and quiet, the highest temperature recorded while running prime95 was around 65C. Without a 3D graphic card, most new games could hardly run, which doesn’t bother me that much.

i’ve also installed an additional fan on the 6150 chipset heatsink ,12CM fan at the back of the PC and a 8cm fan to suck air in for the microprocessor.
airflow

Leave a Comment




XHTML: You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Please note: Comment moderation is enabled and may delay your comment. There is no need to resubmit your comment.